This Quick Start Guide explains how to quickly set up and activate your McAfee® NetworkSecurity Platform [formerly McAfee® IntruShield®] M-3050/M-4050
fClick Device List | Device_Name | Port Settings.For more information on port settings, see Configuration Sensor monitoring andresponse ports, McAfee
11
Copyright © 2014 McAfee, Inc. www.intelsecurity.comIntel and the Intel logo are trademarks/registered trademarks of Intel Corporation. McAfee and the
1 Positioning the SensoraRelease the rails and attach inner rails (of a three-in-one set) to the chassis by fastening it withthe screws provided. bAt
eInstall modules in the Sensor's Monitoring ports. 2 Cabling the Management and Console portsEnsure the Sensor is powered OFF before attaching c
3 Cabling the Monitoring portsThis procedure describes how to cable a Sensor to run in In-line mode.aPlug the cable appropriate for use with your XFP
5 Start the ManagerClick Start | Programs | McAfee | Network Security Manager | Network Security Manager.You do not require a license file for using M
The Add New Device page is displayed. eEnter information in the appropriate fields and click Save.Remember the Shared Secret value entered at this st
The Sensor prompts you to enter thenew password and prompts you forthe old password.A password must contain between 8 and 25 characters, is case-sensi
The Sensor then prompts you to enter the shared key value and confirm the same.This value is used to establish a trust relationship between the Sensor
dSelect your added Sensor: Device List | Sensor_Name. The ports for this Sensor appear under theSensor_Name node."Device_Name" indicates the
Comments to this Manuals